Expert Answers about Chevrolet Hitch Step

• Hitch for Use On 2017 Ram ProMaster 3500 With Rear Step Mounted
• Thank you for the picture. Unfortunately, there isn't going to be a hitch for the 2017 Ram ProMaster 3500 that is compatible with that step. Even something like the Draw-Tite # 75882 which hangs down a little bit further than the Curt # C13295 is going to have the receiver blocked slightly by the step on the rear of your ProMaster. What you could do is remove the rear step and replace it with a hitch mounted step like the WeatherTech BumpStep Hitch-Mounted Bumper Protector and Step for...
  view full answer...


• How To Choose Correct Camper Tie-Downs for a 2020 Chevy Silverado 3500
• There are many TorkLift Custom Frame-Mounted Camper Tie-Down options for a 2020 Chevrolet Silverado 3500. The correct ones will be determined based on bed length, cab size, SRW/DRW, and step option. If you would like to provide this info I would be glad to confirm the correct set otherwise you can simply choose these yourself by filtering the attached results using the above info. TL44FR (C2226) Fits: 2020 - 2021 GMC Sierra 3500 8 Foot Bed - Dual Rear Wheels - without board or step underneath...
  view full answer...


• Can the Hitch Stair with 2 Steps for 2" Trailer Hitches Be Flipped Upside Down
• I have attached for you some dimensions of the Hitch Stair with 2 Steps for 2" Trailer Hitches part # RHS2 that you can then use to determine if it will work on your 2014 GMC Sierra 1500 in the fashion that you described. That said, the step can indeed be flipped upside down but whether or not you would be able to use a closer hitch pin hole and clear your bumper/tailgate is not something I would be able to confirm. If your main concern is storage while not in use you might like the...
  view full answer...


• Will the Pilot Automotive Hitch Step # CR-600LED Clear the Open Tailgate of 2004 Ford F350
• When fully extended, the Pilot Automotive Round Tube Hitch Step # CR-600LED measures 9 inches in length, measured from the hitch pin hole to the furthest edge of the step. To determine if the step will clear your tail gate, measure 9 inches rearward from the hitch pin hole in your receiver. If you find that this hitch step is not long enough, then I recommend taking a look at the Heininger HitchMate Extendable TruckStep, # HE4045. This hitch step can extend up to 23-1/2 inches away from...
  view full answer...


• Will the Bestop TrekStep Truck Bumper Step Work With Dual Exhaust 2015 Ram 1500
• If the dual exhaust pipes on your 2015 Ram 1500 exit before the rear tires or through the bed then the Bestop TrekStep Truck Bumper Step part # B75306 will work well for you. However, if your exhaust pipes exit behind the rear tires or under the bumper then the TrekStep will not work for you. The only truck bed step option we have for vehicles with dual exhaust that exit behind the rear tires or under the bumper is the Bully Black Bull Hitch-Mounted Step part # BBS-1102. If you do not...
  view full answer...


• Is There A Compatible Hitch Mounted Step For An Andersen EZ Ballmount
• I went out to the warehouse and test these two products together and the hole spacing for the # 358STEP just doesn't line up with the spacing on the Andersen shank. I tested all of the other channel mounted steps we have as well and was unable to find a fit. If you wanted to switch to a BulletProof hitch ballmount like the # HD256 then you would be able to use the hitch step. The only other option would be to remove the Andersen hitch as needed and use a hitch mounted step like # C31001.
  view full answer...


• Swing Out Step AS-550 and Other Steps for a 2000 Toyota Tacoma
• The Truck Bed Swing Out Step, # AS-550, is not designed to fit on a 2000 Toyota Tacoma. Currently the only steps available for your vehicle are tube steps and running boards like the Westin Tube Steps - Running Boards, # 25-0835. If you have a hitch installed on your 2000 Toyota Tacoma, we carry hitch steps like the Round Tube Stainless Steel Trailer Hitch Receiver Step, # CR-600.
  view full answer...


• Solution for Hitch Step for Truck With B&W Adjustable Ball Mount
• A hitch step like the Curt # C45909 is designed to fit inside of a channel. The design of a B&W ball mount like the # BWTS20049B would require a step that fit around the outside. Unfortunately, there are no options to add a step to the B&W. However, you could use a step like the Gen-Y # GY79VR. The only thing this would lack is the ability to adjust the height. The only other option would be to switch ball mounts completely and use one like the # C45900 which would allow you to use the...
  view full answer...


• Will HitchMate TruckStep Extendable, Hitch Mounted Step, # HE4045, Fit a 2013 Ram 2500 Crew Cab
• On the HitchMate TruckStep Extendable, Hitch Mounted Step, # HE4045, from the bottom of the outside of the trailer hitch receiver tube to the top of the strut that would go under the truck it measures approximately 2 inches. If the area under the receiver is clear 2 inches down and back then it will fit. If it is not clear we do have other options such as a custom fit step, # B75306.
  view full answer...


• The Best Trailer Hitch for a 2014 Mercedes Sprinter Van with Factory Step Bumper
• What you see in the pictures for Curt trailer hitch # 13358 is the factory step bumper that comes on some Sprinter vans. There is probably an aftermarket version of it out there but we do not carry it. It is attached separately from the vehicle on the underside. Take a look at the picture I have included that shows the different attachment points for the hitch and the step bumper. If you plan on installing one of these steps then you would need a hitch like # 13358 designed for models...
  view full answer...


• Will the HitchMate Adjustable Hitch Step Part HE4045 Clear Tailgate of Chevy 2500 HD
• I went out to our warehouse, and pulled one of the HitchMate Hitch Steps, part # HE4045 off the shelf. When fully extended, the hitch step is 23-1/2 inches long, when measured rearward from the face of the hitch receiver. You should find that this hitch step will provide plenty of clearance when your tailgate is down.
  view full answer...


• Hitch Step for a 2019 Ram 1500
• As of July (2017), they have not released any truck bed steps for a 2019 Ram 1500. This has to due with the truck only being out for a few months and the manufacturer's inability to obtain any test mules. I am sure there will be options for you as time progresses but as of now the only option is a hitch step like the Bully Black Bull Hitch-Mounted Step part # BBS-1102. I have attached a list of all the hitch steps we offer as well.
  view full answer...


• Does Hitch Mounted Step fit Honda Odyssey?
• The Hitch Step # C31001 is a universal step and will fit anything that has a 2 inch hitch receiver on it, including your Honda Odyssey. It will only require the use of a hitch lock such as # e98880 or a 5/8 inch pin and clip such # PC3 to secure it to your hitch.
  view full answer...


• Will The Draw Tite 75210 Fit Vehicles With The Factory Step Bumper
• I apologize for any confusion. With these 2005 Sprinters there are many different versions, and sometime our vehicle listing can get a little crowded/confusing. The draw tite hitch # 75210 will be a good fit for your 2005 Sprinter 158" wheelbase SRW with the factory step bumper. We have confirmed this with the folks at Draw-tite, as well as with several of our customers, who have successfully installed the hitch on vehicles with the step bumper.
  view full answer...


• How to Determine if HitchMate Receiver Mount TruckStep Will Fit 2020 Ford Expedition Max Platinum
• The HitchMate TruckStep Extendable, Hitch Mounted Step, # HE4045 fits most vehicles but you will want to take some measurements to be certain it fits your 2020 Ford Expedition Max Platinum. First measure from the center of the hitch pin hole to the where the end of our telescoping rail will set. This will be about 19-1/2", see the attached image and note the linked product video. Where the hitchstep mounts to the receiver, there is a 1-5/8" gap. Please note other options such as the...
  view full answer...


• How to Measure to Determine Fit of Carr Mega Step Fold-Up Hitch-Mount Step CARR190011
• The USA-made Carr Mega Step Fold-Up Hitch-Mount Step # CARR190011 will fit into any 2-inch hitch so long as the hitch position at the vehicle's rear bumper provides clearance for the step's backing plate. On some vehicles the hitch opening may be recessed under the bumper and this might not allow enough clearance for the backing plate to clear the vehicle bumper. This is not usually the case with an F-150. Please have a look at the linked videos for this product which will help you determine...
  view full answer...


• Will HitchMate Extendable TruckStep # HE4045 Clear Spare and Tailgate on a 2017 Ram 1500
• On the HitchMate Extendable TruckStep # HE4045 you will need to look at some measurements and compare them to your 2017 Ram 1500 to determine fit. The long arm with the step on it extends back under the vehicle about 22 inches from the face of the hitch receiver and hangs down about 1-5/8 inches from the bottom of the receiver. With those measurements you will be able to determine if the spare tire would be an issue. With the step pulled all the way out it will measure about 13 inches...
  view full answer...


• Would A PortablePET Twistep Hitch Step Be Compatible With A 2012 Range Rover
• The PortablePET Twistep Hitch Step # HE3045 would be compatible with your 2012 Range Rover as long as it has a 2" trailer hitch receiver for the step to mount into. When fully extended you would have a 44-1/2" measurement from the hitch pin hole to the outer edge of the step.
  view full answer...


• Will WeatherTech BumpStepXL Hitch-Mounted Bumper Protector Interfere with Reverse Sensors or Camera
• The WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch part # WT81BS1XL should not interfere with the backup camera or reverse sensors on a vehicle. We aren't able to test this for every vehicle obviously but in most cases, it does not stick out far enough to affect either the backup camera or reverse sensors. If you need helping reaching items on the roof of the vehicle, this is the perfect step for you that will make this task much easier. Please note, the step...
  view full answer...


• How to Determine if HitchMate Extendable Receiver Mount TruckStep Will Fit a 2012 Chevy Silverado
• To determine if the extendable hitch step # HE4045 will fit your 2012 Chevy Silverado you will have to take some measurements. Measure from the bottom of your hitch receiver down 1-5/8 inches. Then from that point measure back up to 22-1/2 inches. If there are no obstructions in that area and you have a 2 inch receiver then you can use the step. I have included a picture that should help. For a hitch step that doesn't extend we have # MT70069 which costs a little less than the other step....
  view full answer...